Prostreetin pete!!

Tekniikka-aiheinen keskustelu moottoriin liittyvistä asioista.
Moottorinohjaus, toiminta, tyyppivikoja, korjauksia, jne...
Älä laita tänne kysymyksiä virittämisestä, sillä niille on olemassa oma alueensa.
Vastaa Viestiin
Venom
'Kapitän'
'Kapitän'
Viestit: 63
Liittynyt: 07 Touko 2002, 03:00
Paikkakunta: Helsinki

Viesti Kirjoittaja Venom »

Minkä hintaisia on 1.3. ohc kadetin/asconan kireämmät nokat.. Tarkoitus olisi laittaa hyvä katunokka kyseiseen peliin? samalla olisi tarkoitus avartaa hieman kanavia ja höylätä siivu pois kannesta.. 40mm tuplat on ilmeisesti sopivan kokoiset kaasarit. Kaippa tuolla yhdistelmällä saa jo suht pirteän paketin kevyessä autossa..
ProStreet
'Diplomat'
'Diplomat'
Viestit: 2165
Liittynyt: 30 Tammi 2002, 02:00
Viesti:

Viesti Kirjoittaja ProStreet »

Cat Cams hydr. katunokat Opel ohc 8v "small block":

partnr
duration@0.1mm
timing@0.1mm
max.lift (mm)
lift@TDC (mm)
clearance (mm)

duration@0.050"
timing@0.050"
max. lift (inch)
lift@TDC (inch)
clearance (inch)

peak angle
followers
springs
retainers
infolink

-------------

4600381
264° - 268°
19/65 - 67/21
9.50 - 9.50
0.70 - 0.80
hydro

212° - 212°
-7/39 - 39/-7
0.373 - 0.374
0.028 - 0.031
hydro

113° - 113°
STD
STD
STD
41,151

--------------

4600318
274° - 274°
25/69 - 69/25
9.70 - 9.70
1.00 - 1.00
hydro

216° - 216°
-4/40 - 40/-4
0.383 - 0.383
0.039 - 0.039
hydro

112° - 112°
STD
STD
STD
151

--------------

4600300
264° - 264°
21/63 - 63/21
10.25 - 10.25
0.90 - 0.90
hydro

212° - 212°
-5/37 - 37/-5
0.404 - 0.404
0.035 - 0.035
hydro

111° - 111°
STD
STD
STD
42,151

---------------

4600313
264° - 264°
24/60 - 60/24
10.25 - 10.25
1.10 - 1.10
hydro

212° - 212°
-2/34 - 34/-2
0.404 - 0.404
0.043 - 0.043
hydro

108° - 108°
STD
STD
STD
43,151

----------------

4600315
272° - 270°
24/68 - 67/23
10.55 - 10.50
1.20 - 1.20
hydro

222° - 222°
-1/43 - 43/-1
0.415 - 0.413
0.047 - 0.047
hydro

112° - 112°
STD
STD
STD
151

----------------

4600320
284° - 284°
35/69 - 69/35
10.60 - 10.60
2.00 - 2.00
hydro

228° - 228°
7/41 - 41/ 7
0.418 - 0.418
0.079 - 0.079
hydro

107° - 107°
STD
STD
STD
151

-----------------

4601024
270° - 270°
21/69 - 69/21
11.20 - 11.20
0.80 - 0.90
hydro

218° - 216°
-5/43 - 42/-6
0.442 - 0.442
0.031 - 0.035
hydro

114° - 114°
STD
902-3009
99353
7,151

----------------

4601003
270° - 270°
26/64 - 64/26
11.20 - 11.20
1.30 - 1.20
hydro

218° - 216°
0/38 - 37/-1
0.442 - 0.442
0.051 - 0.047
hydro

109° - 109°
STD
902-3009
99353
7,151

----------

Infolink

7
In some small block engines, the retainer will hit the valve seal at 11mm lift and more. distance between valve seal and retainer is to be adjusted!

41
Sport version for 1400-1600 OHC

42
Sport version for 1300N OHC

43
Sport version for 1300S OHC

151
rocker ratio at full lift varies and depends from valve length, base circle, cam lift etc.

For the catalogue data, we perform a simulation based on OEM geometry data corrected for catcams' actual base circle

Please keep in mind that these calculations are very sensitive on geometrical data, flexibility of rocker arms/shafts etc. No simulation of this kind will ever be 100% error free

---------

Cat Cams hydr katunokat Opel ohc 8v 1,2-1,6 "small block" h 292e

keinut 80e
hydrot h 80e

Cat Cams jouset h 84e srj
Cat Cams aluretainerit h 111e srj

_________________
Pete
http://www.prostreet.fi
myynti@prostreet.fi
tel +358-19-469640
gsm +358-400-790019
gsm +358-41-5132882
fax +358-19-469600



<font size=-1>[ This Message was edited by: ProStreet on 2002-09-18 13:30 ]</font>
ProStreet
'Diplomat'
'Diplomat'
Viestit: 2165
Liittynyt: 30 Tammi 2002, 02:00
Viesti:

Viesti Kirjoittaja ProStreet »

40mm tuplakaasarit + imusarjat + torvet suodattimet h 770e srj
Vastaa Viestiin